GRPA - S 1719 Series Specification
GRPA - S 1719 Series Specification
Antenna Ordering
Microwaves Antennas
GRPA S 1719 Series
Electrical Specification |
GRPA 0.6 S 1719 N |
GRPA 0.9 S 1719 N |
GRPA 1.2 S 1719 N |
GRPA 1.8 S 1719 N |
Operating Frequency |
1.700–1.900 GHz |
|||
Diameter |
0.6 m |
0.9 m |
1.2 m |
1.8 m |
Gain mid-band |
18.0 dBi |
21.5 dBi |
24.0 dBi |
27.6 dBi |
Polarization |
Linear Simplex (Vertical or Horizontal) |
|||
Half-Power Beamwidth |
19.4° |
12.9° |
9.7° |
6.5° |
Return Loss |
−14.0 dB |
−14.0 dB |
−14.0 dB |
−14.0 dB |
Front-to-Back Ratio |
24 dB |
28 dB |
30 dB |
30 dB |
Cross-Polar Discrimination |
24 dB |
28 dB |
28 dB |
30 dB |
Connector1 |
N (female) connector |
|||
Mechanical Specification |
GRPA 0.6 S 1719 N |
GRPA 0.9 S 1719 N |
GRPA 1.2 S 1719 N |
GRPA 1.8 S 1719 N |
Net Weight2 |
6.0 kg |
9.5 kg |
20 kg |
42 kg |
Antenna Pointing Range |
GRPA 0.6 S 1719 N |
GRPA 0.9 S 1719 N |
GRPA 1.2 S 1719 N |
GRPA 1.8 S 1719 N |
Azimuth raw/fine |
±180° / – |
±180° / – |
±180° / – |
±180° / ±5° |
Elevation raw/fine |
±15° / – |
±15° / – |
– / ±10° |
– / ±5° |
Material and Finish |
GRPA 0.6 S 1719 N |
GRPA 0.9 S 1719 N |
GRPA 1.2 S 1719 N |
GRPA 1.8 S 1719 N |
Mount |
Hot-Dip-Galvanized Steel |
|||
Installation Hardware |
Stainless Steel |
|||
Feed |
Aluminium/Copper |
|||
Environmental Specification |
GRPA 0.6 S 1719 N |
GRPA 0.9 S 1719 N |
GRPA 1.2 S 1719 N |
GRPA 1.8 S 1719 N |
Operating Windspeed |
140 km/h |
|||
Survival Windspeed3 |
240 km/h |
|||
Ambient Temperature |
−55°C…+55°C |
|||
ETSI Standard |
GRPA 0.6 S 1719 N |
GRPA 0.9 S 1719 N |
GRPA 1.2 S 1719 N |
GRPA 1.8 S 1719 N |
Range |
0 |
0 |
0 |
0 |
Class |
1 |
1 |
1 |
1 |
2 Other connector types are available upon request.
2 Clamps, adjustment system (and side strut from 1.8 m diameter) are included.
3 Increased wind load is available upon request.
Ordering Information
For ordering information please visit our Antenna Ordering page.
For more information about Grid Antennas please contact us via e-mail.