1 – Mounting at Antenna Side

This field is optional, required only for hybrids.

IIntegrated (direct mount)
SSeparated (separate mount)
2 – Product Type

 

SHSingle Polarized Hybrid
DHDual Polarized Hybrid
OMTOrthoMode Transducer (available only in integrated design)
3 – Frequency Band

Operational frequency in GHz multiplied by 10.

If the hybrid is wideband, or the operational frequency range is not commonly used, the minimum and the maximum operational frequency is indicated here.

4 – Interface at ODU Side
AAlcatel Interface
C(IP10)Ceragon IP10 Interface
DWDragonWave Horizon Interface
RAU2Ericsson Mini-Link Interface (RAU12 = RAU1&RAU2)
RC1Remec RC1 Interface (Huawei, Sagem)
RR1Remec RR1 Interface (Huawei, Sagem)
IIntracom Intralink Interface
SWISKRA (SparkWave) Interface
NECNEC Pasolink Interface (for most recent and/or most popular NEC ODU)
Please note that this field requires further specification in some cases (e.g. at lower frequencies).
V23NEC Pasolink Interface (V23 = V2&V3)
FNokia Flexihopper Interface
SIAESIAE Interface
S4Siemens S4 Interface
NN Connector
Standard Waveguide Flange (according to IEC60154-2 or other standards)
Flange material (aluminium or brass) has to be specified.
etc.Any other interface is available upon request.
5 – Coupling of the Hybrid

This field is optinal, required only for hybrids.

33 dB nominal coupling (50%)
66 dB nominal coupling (25%)
1010 dB nominal coupling (10%)
etc.Any other coupling coefficient is available upon request.
6 – Interface at Antenna Side
UUniversal Interface: the hybrid can be directly attached to the back of the direct mounted antenna, i.e. single ODU (1+0) system can be upgraded to (1+1) hot standby system.
Standard Waveguide Flange (according to IEC60154-2)
Flange material (aluminium or brass) has to be specified.
etc.Any other interface is available upon request. (E.g. Sagem Antenna Interface with NEC ODU interface.)

Example #1

I SH 180 2NEC 3 U

I Integrated Mount to the Antenna
SH Single Polarized Hybrid
180 Operational Frequency: 18 GHz band (17.700–19.700 GHz)
2NEC Two NEC ODU Interfaces for most recent ODUs (currently: NEO)
3 3 dB (50%) nominal coupling
U Universal Antenna Interface: hybrid is directly attached to the back of the direct mounted antenna with NEC interface

Example #2

S SH 59 2N 3 PDR70 Alu

S Separate Mount to the Antenna
SH Single Polarized Hybrid
59 Operational Frequency: 5.9 GHz band (5.925–6.425 GHz)
2N Two N connectors at ODU side
3 3 dB (50%) nominal coupling
PDR70 Alu PDR70 Aluminium Interface at Antenna Side (Antenna is connected to the hybrid with flexible waveguide.)

Example #3

IDH 150 4SIAE V3H6 GRANTE

I Integrated Mount to the Antenna
DH Dual Polarized Hybrid
150 Operational Frequency: 15 GHz band (14.200–15.350 GHz)
4SIAE Four SIAE ODU Interfaces
V3H6 Vertical branch: 3 dB (50%) nominal coupling; Horizontal branch: 6 dB (25%) nominal coupling
GRANTE GRANTE Antenna Interface: hybrid is directly attached to the back of the direct mounted GRANTE antenna

Example #4

ISH 130 4S 6 U

I Integrated Mount to the Antenna
SH Single Polarized Hybrid
130 Operational Frequency: 13 GHz band (12.750–13.250 GHz)
4S Four Siemens ODU Interfaces for most recent ODUs (currently: S4)
6 6 dB (25%) nominal coupling
U Universal Antenna Interface: hybrid is directly attached to the back of the direct mounted antenna with Siemens interface

Example #5

OMT 130 2NEC SBX-127CB

OMT Orthomode Transducer
130 Operational Frequency: 13 GHz band (12.750–13.250 GHz)
2NEC Two NEC ODU Interfaces for most recent ODUs (currently: NEO)
SBX-127CB Interface at Antenna Side for RFS antenna type SBX-127CB

Ordering
Possibilities

Each order is to be confirmed by GRANTE.

e-mail: grante@grante.hu

fax: +36 33 435 265

post: H–2501 Esztergom, POB. 84., Hungary

air01 (2)