| Electrical Specification | HXPA 0.8 D 130 FR | HXPA 1.2 D 130 FR | HXPA 1.5 D 130 FR | HXPA 1.8 D 130 FR |
| Operating Frequency | 12.750–13.250 GHz | |||
| Diameter | 0.8 m | 1.2 m | 1.5 m | 1.8 m |
| Gain mid-band | 37.5 dBi | 40.9 dBi | 42.8 dBi | 44.6 dBi |
| Polarization | Linear Duplex (Vertical and Horizontal) | |||
| Half-Power Beamwidth | 2.0° | 1.4° | 1.2° | 0.9° |
| Return Loss | −19.1 dB | −19.1 dB | −19.1 dB | −19.1 dB |
| Front-to-Back Ratio | 63 dB | 68 dB | 70 dB | 72 dB |
| Cross-Polar Discrimination | 36 dB | 36 dB | 36 dB | 36 dB |
| Inter-Port Isolation | 42 dB | 42 dB | 42 dB | 42 dB |
| Flange1 | Upon Customer’s Request | |||
| Mechanical Specification | HXPA 0.8 D 130 FR | HXPA 1.2 D 130 FR | HXPA 1.5 D 130 FR | HXPA 1.8 D 130 FR |
| Net Weight2 | 31 kg | 53 kg | 90 kg | 151 kg |
| Antenna Pointing Range | HXPA 0.8 D 130 FR | HXPA 1.2 D 130 FR | HXPA 1.5 D 130 FR | HXPA 1.8 D 130 FR |
| Azimuth fine | ±20° | ±15° | ±5° | ±5° |
| Elevation fine | ±30° | ±20° | ±5° | ±5° |
| Material and Finish | HXPA 0.8 D 130 FR | HXPA 1.2 D 130 FR | HXPA 1.5 D 130 FR | HXPA 1.8 D 130 FR |
| Mount | Hot-Dip-Galvanized Steel | |||
| Installation Hardware | Stainless Steel | |||
| Feed | Aluminium | |||
| Environmental Specification | HXPA 0.8 D 130 FR | HXPA 1.2 D 130 FR | HXPA 1.5 D 130 FR | HXPA 1.8 D 130 FR |
| Operating Windspeed | 140 km/h | |||
| Survival Windspeed | 200 km/h | |||
| Ambient Temperature | −55°C…+55°C | |||
| ETSI Standard | HXPA 0.8 D 130 FR | HXPA 1.2 D 130 FR | HXPA 1.5 D 130 FR | HXPA 1.8 D 130 FR |
| Range | 1 | 1 | 1 | 1 |
| Class | 3 | 3 | 3 | 3 |
1 Coaxial cable connector, standard waveguide flange or any ODU interface is available upon request.
2 Approximate weight (net weight depends on the required interfaces). Clamps, adjustment system (and side strut from 0.8 m diameter) are included.
For ordering information please visit our Antenna Ordering page.
For more information about High Cross-Polarization Discrimination Antennas pleas contact us via e-mail.
