High Performance Antennas (HPA)

Antenna Ordering

HPA 7185 Datasheet (pdf)

HPA S 7185 Series

Electrical Specification	HPA 0.6 S 7185 FR	HPA 0.8 S 7185 FR	HPA 1.2 S 7185 FR	HPA 1.5 S 7185 FR	HPA 1.8 S 7185 FR
Operating Frequency	7.125–8.500 GHz
Diameter	0.6 m	0.8 m	1.2 m	1.5 m	1.8 m
Gain mid-band	30.2 dBi	33.0 dBi	36.8 dBi	38.8 dBi	40.4 dBi
Polarization	Linear Simplex (Vertical or Horizontal)
Half-Power Beamwidth	4.5°	3.4°	2.3°	1.8°	1.5°
Return Loss	−19.1 dB	−19.1 dB	−23.1 dB	−23.1 dB	−23.1 dB
Front-to-Back Ratio	60 dB	63 dB	67 dB	69 dB	70 dB
Cross-Polar Discrimination	30 dB	30 dB	30 dB	30 dB	30 dB
Flange1	Upon Customer’s Request
Mechanical Specification	HPA 0.6 S 7185 FR	HPA 0.8 S 7185 FR	HPA 1.2 S 7185 FR	HPA 1.5 S 7185 FR	HPA 1.8 S 7185 FR
Net Weight2	14 kg	26 kg	62 kg	85 kg	146 kg
Antenna Pointing Range	HPA 0.6 S 7185 FR	HPA 0.8 S 7185 FR	HPA 1.2 S 7185 FR	HPA 1.5 S 7185 FR	HPA 1.8 S 7185 FR
Azimuth fine	±20°	±20°	±15°	±5°	±5°
Elevation fine	±30°	±30°	±20°	±5°	±5°
Material and Finish	HPA 0.6 S 7185 FR	HPA 0.8 S 7185 FR	HPA 1.2 S 7185 FR	HPA 1.5 S 7185 FR	HPA 1.8 S 7185 FR
Mount	Hot-Dip-Galvanized Steel
Installation Hardware	Stainless Steel
Feed	Aluminium
Environmental Specification	HPA 0.6 S 7185 FR	HPA 0.8 S 7185 FR	HPA 1.2 S 7185 FR	HPA 1.5 S 7185 FR	HPA 1.8 S 7185 FR
Operating Windspeed	120 km/h
Survival Windspeed	220 km/h
Ambient Temperature	−55°C…+55°C
ETSI Standard	HPA 0.6 S 7185 FR	HPA 0.8 S 7185 FR	HPA 1.2 S 7185 FR	HPA 1.5 S 7185 FR	HPA 1.8 S 7185 FR
Range	1	1	1	1	1
Class	3	3	3	3	3

¹ N connector, standard waveguide flange or any ODU interface is available upon request.
² Approximate weight (net weight depends on the required interface). Clamps, adjustment system (and side strut from 0.8 m diameter) are included.

 

Ordering Information

For ordering information please visit our Antenna Ordering page.

For more information about High Performance Antennas please contact us via e-mail.